Pressure Boosting Pumps FH2
Pressure Boosting Pumps
series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies.
In addition, the TH series offers high pressures at short immersion depths.
Inline pumps of the series FH can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar.
A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point.
See page "Control/Regulation" in the Technical Information section of this catalog for further information.
Applications
Types of fluid | Industrial water coolants cooling/cutting oils |
Kinematic viscosity | 1 mm²/s (1 cSt) higher viscosity upon request |
Pumping temperature | 0...80° C |
Construction
Pump body | cast iron |
Cover | cast iron |
Impellers | CrNi-steel |
Shaft | CrNi-steel |
Diffusers | CrNi-steel |
Mechanical seal | SiC |
O-rings | Viton |
Optional: | |
Pump body | bronze |
Cover | bronze |
Pole-changing motor | 4 - 2 poles |
Noise level | 58 dBA (FH203...FH222A) 63 dBA (FH223...FH240A) |